Engine Cars

1. Raise the hood and locate the oil filter housing. Remove the retaining bolt from the top of the housing with a 13mm socket wrench. Pull the cap up and off the housing. Remove the oil filter from the housing; it will still contain oil so have a container close-by to place it into.
2. Install the larger rubber O-Ring supplied with the new filter under the oil filter housing cap. Then install the small aluminum washer under the oil filter housing bolt.
3. Insert the new oil filter into the filter housing. Replace the oil filter housing cap and tighten the bolt.

1. Locate the cabin air filter access cover. Typically it is found under the hood at the very back of the engine compartment, or under the dash on the passenger side.
2. Using your screwdriver, unscrew the cover and remove the old cabin air filter.
3. Compare the new cabin air filter to the old one to make sure it is the proper size.
4. Set the old cabin air filter aside.
5. Using your rag, wipe out the cabin air filter compartment to remove remaining dirt and dust.
6. Place the new cabin air filter in the compartment, pressing down and side to side to ensure proper fit. Some filters have a foam gasket on the underside; make sure the filter is installed correctly.
7. Replace the cabin air filter access cover.
8. Wipe yourself and the area clean with rags.