Engine Cars

1. Locate the exterior light switch. The dial can be found to the left of the steering wheel and below the instrument panel.
2. Pull the dial toward you one notch to turn on the fog lights. Pull the dial out two notches to also turn on the rear fog lights. Turn the dial clockwise two notches to turn on the headlights while the fog lights are illuminated.
3. Turn off the fog lights by pressing the dial back into its base position.

1. Remove the fuse panel cover and locate the 15-pin or 20-pin diagnostic connector.
2. Plug the reset tool into the connector input.
3. Turn the BMW ignition to the II position, but do not crank the engine.
4. Wait 15 seconds until all of the service lights have been reset. The indicator light on the tool should stop blinking at this point.